Lelit Mara X PL62X with 3 levels PID V2

The Lelit Mara PL62X - the new version \n \n Small & compact \n \nThe Mara PL62X from Lelit impresses with its compact size and its good price-performance ratio. The special PID-controlled dual-circuit system allows you to influence the espresso temperature. \n \ nHighlights: \n

\n
• Expansion valve is no longer drained into the water collecting tray
\n
• New steam and hot water valve: with Lelit logo and the valves are slightly longer so that the steam or hot water lance no longer comes into contact with the housing during use and thus can no longer cause scratches on the front panel
\n
• IMS sieves: The scope of delivery now includes the precision sieves, which are manufactured in cooperation with IMS
\n
• PID for espresso and steam temperature
\n
• Stainless steel boiler
\n
• Silent Pump System
\n

\n Power saving mode \n \nYou can choose whether you want to activate the energy saving mode or not. In energy saving mode, the machine switches to standby mode after 30 minutes of inactivity, i.e. the boiler is no longer heated. The machine can then be reactivated by operating the brewing group lever. \nTo activate or deactivate the energy saving mode, switch the machine off, lift the brewing group lever and then switch the machine back on. After about 5 seconds, the activity light on the power button starts to flash. The energy saving mode is now activated or deactivated. \n \n Priority and temperature switches \n \nThere are 2 switches behind the water collecting tray. \n \n In position 1 is the Xmode steam \n \nIn this mode, the machine gives more priority to the steam temperature. As soon as the espresso is made, the machine heats up to provide sufficient steam power. \n \n At position 0 the Xmode coffee is \n \nIn this mode, the priority is on espresso. The steam temperature, and thus the steam pressure, goes down a little, which means that the brewing water does not overheat when inactive, as it does with a normal dual-circuit machine. This makes empty brewing unnecessary. \n \nThe brewing temperature is regulated via the 3-stage switch on the front. The following brewing temperatures can be set: \nPosition 0: approx. 92 degrees - perfect for dark roasts \nPosition I: approx. 94 degrees - perfect for medium roasts \nPosition II: approx. 96 degrees - perfect for light roasts \n \nPlease note that when making espresso, the machine immediately reheats the steam boiler so that milk can be frothed afterwards. However, the water is then too hot for the espresso.